Fokus auf:  Beiträge verstecken
Einloggen

Wet Run 2026 Operator School

→ Europe/Berlin
SB3.3.170a - Seminarraum SB (Theorie)

SB3.3.170a - Seminarraum SB (Theorie)
Peter Gerhard (GSI Helmholtzzentrum für Schwerionenforschung GmbH(GSI))
Beschreibung

This school shall provide a rough overview of new and/or changed control system procedures to users and interested colleagues, providing a foundation for the more comprehensive tutorial sessions planned during the wet run.

The demonstrations during the school shall build upon the presentations given during the 2025 operator school. Since time is limited, they will focus on:

  • Changes introduced for integrating UNILAC in to the control system
  • Operating procedures required for conducting the wet run
  • Limitations currently in place because some control system components are still in development

To prepare for the school, you may want to revisit the following presentations given during the 2025 operator school:

Also, optionally:

 

    • Introduction
      Vorsitzende der Sitzung: Hanno Hüther (GSI Helmholtzzentrum für Schwerionenforschung GmbH(GSI)), Peter Gerhard (GSI Helmholtzzentrum für Schwerionenforschung GmbH(GSI))
      OpSchool2026_1_Intro.odp
      OpSchool2026_1_Intro.pdf
      • 1
        Goals and schedule for the school
        Sprecher: Hanno Hüther (GSI Helmholtzzentrum für Schwerionenforschung GmbH(GSI)), Peter Gerhard (GSI Helmholtzzentrum für Schwerionenforschung GmbH(GSI))
      • 2
        Goals and schedule for the wet run
        Sprecher: Hanno Hüther (GSI Helmholtzzentrum für Schwerionenforschung GmbH(GSI)), Peter Gerhard (GSI Helmholtzzentrum für Schwerionenforschung GmbH(GSI))
      • 3
        Operating restrictions for the wet run
        • Restrictions resulting from radiation protection and/or renovation of experimental hall
        • Restrictions resulting from in-development state of the control system
        • Other restrictions
        Sprecher: Hanno Hüther (GSI Helmholtzzentrum für Schwerionenforschung GmbH(GSI)), Peter Gerhard (GSI Helmholtzzentrum für Schwerionenforschung GmbH(GSI))
    • Demonstrations
      • 4
        UNILAC Chain Setup Basics

        Establish and schedule UNILAC Chains, setup up global parameters, and basic diagnostics

        • Set/check non-mux parameters in ParamModi (Peter)
        • Creating UNILAC Chains in the Scheduling App (Peter)
        • Scheduling Chains in the Unilac Emergency App (Peter)
        • Adjusting global Chain paramters in ParamModi (Peter)
        • Enabling/disabling Chains in the BSS Client App (Ben/Stefan?)
        • Activating/deactivating Profile Grid Protection (Ben/Stefan?)
        • Checking and masking interlocks in MASP (Max?)
        • Determining the status of a UNILAC Chain in What’s running UNILAC CCI (Christian)
        Sprecher: Benjamin Peter (GSI Helmholtzzentrum für Schwerionenforschung GmbH(GSI)), Christian Hillbricht (GSI Helmholtzzentrum für Schwerionenforschung GmbH(GSI)), Max Mueller (GSI Helmholtzzentrum für Schwerionenforschung GmbH(GSI)), Peter Gerhard (GSI Helmholtzzentrum für Schwerionenforschung GmbH(GSI)), Stefan Krepp (GSI Helmholtzzentrum für Schwerionenforschung GmbH(GSI))
      • 10:30
        Coffee break
      • 5
        SIS18 Chain Setup Basics

        Chair: Hanno Hüther
        Presenters: see () below

        Establish and schedule SIS18 chains together with UNILAC chains

        • Creating a SIS18 Chain in the Scheduling App (t.b.d.)
        • Scheduling a SIS18 Chain in the Unilac Emergency App (t.b.d.)
        • Enabling/disabling SIS18 Chains and the consequences for UNILAC (t.b.d.)
        • UNILAC request no beam / no request does not exist anymore (t.b.d.)
        • Changing the length of a SIS18 Chain (t.b.d.)
      • 11:45
        Lunch break
      • 6
        UNILAC and SIS Chains Advanced Topics

        Chair: Hanno Hüther
        Presenters: see () below

        • Scheduling multiple Chains for SIS18 (Hanno)
          • Supplied by the same UNILAC Chain
          • Supplied by different UNILAC Chains
        • Setting up multi-multiturn injection (Hanno)
        Sprecher: Hanno Hüther (GSI Helmholtzzentrum für Schwerionenforschung GmbH(GSI))
      • 7
        Separate Patterns for Synchrotrons and Storage Rings

        Chair: t.b.d.
        Presenters: see () below

        • Creating Chains for ESR/CRYRING/SIS100 in Scheduling App (t.b.d.)
        • Creating Patterns not including UNILAC in Expert Pattern App (t.b.d.)
        • Coupling Chains in BSS Control (t.b.d.)
        • Enabling/Disabling Chains in separate Patterns (t.b.d.)
        • Controlling Storage Ring Mode features (t.b.d.)
      • 14:00
        Coffee break
      • 8
        Additional UNILAC operating applications

        Chair: Peter Gerhard
        Presenters: see () below

        Go through UNILAC operating apps, set priority as requested by the operators.
        This block and subject to change.

        • Cups Control / EH Chopper Request App (Rebecca)
        • Profile Grid Protection App und Profile Grid App
        • PotiBoard
        • Cups only MAPS2 App, Bottles Emergency App, New MAPS App (Harald)
        • Ion Source App (Florian)
        • Spectrum App (Jonas)
        • ParamModi opstore export (Jutta)
        • Device Control App (Jutta)
          verschoben:
        • die HF Service App, UniMon, Phase App, UNILAC Energiemessung App benutzen
        Sprecher: Peter Gerhard (GSI Helmholtzzentrum für Schwerionenforschung GmbH(GSI))
    • Wrap-up
      • 9
        Discussion
      • 10
        Feedback
Powered by Indico v3.3.9