9-12 February 2010
GSI Helmholtzzentrum für Schwerionenforschung GmbH
Europe/Berlin timezone

Development of High Resolution Readout Electronics for MRPC

12 Feb 2010, 12:30
20m
Hörsaal GSI (GSI Helmholtzzentrum für Schwerionenforschung GmbH)

Hörsaal GSI

GSI Helmholtzzentrum für Schwerionenforschung GmbH

Planckstr. 1 64291 Darmstadt Germany

Speaker

Dr Zhi Deng (Tsinghua University, Beijing)

Description

High resolution readout electronics is under development for MRPC detectors. It consists of a fast front‐end ASIC and an ultra high resolution TDC based on FPGA. The front‐end ASIC, CAD (Current Amplifier and Discriminator), works in fully current mode. Signal pulses are amplified by a current mirror with local negative feedback to reduce the input impedance and then are sent to a current comparator. Current mode design can achieve higher bandwidth with less power consumption compared to voltage mode approaches. The chip is designed in a 0.35μm CMOS technology but this architecture is well suited for deep submicron technologies with lower supply voltage. In order to obtain time resolution of ~10ps in a FPGA TDC, a delay chain is used to interpolate time phases inside a clock. But it usually suffers from bad control of the delay time for each delay unit. The so‐called wave union method is used to improve the linearity and the resolution. The detailed the design and test results will be present in this paper.

Primary author

Dr Zhi Deng (Tsinghua University, Beijing)

Presentation Materials

There are no materials yet.